SWAN2-R
wireless M-Bus / NB-IoT Gateway
SWAN is the largest of all the ducks and usually stays with his partner all his life.
The SWAN2 is a gateway with a replaceable battery that uses LTE Cat NB1 technology to connect up to 250 wireless MBus devices directly to the mobile network.
Provisioning takes place using a NFC interface, thus allowing to use your smart phone during installation. The same holds for the process of firmware update. In addition, remote configuration and FOTA (Firmware-Over-the-Air) can be performed over HTTP/S and LwM2M protocols.
The OMS 3.x and 4.x compliant wireless M-Bus interface operates at 868 MHz and supports mode S, T and C, frame formats A and B.
The following protocols are supported: UDP, HTTP/S, LwM2M.
SWAN2 is equipped with 2 C-cells, which can be replaced if necessary. The operating time of approx. 10 years depends on the frequency of the upload and collection process and the signal strength.
For permanent operation with available main supply, we offer the SWAN3 as a suitable variant.
- 3GPP licensed technology
- Weight < 400 g
- Ideal for Smart Metering
- Usage within the temperature range: -20 – +55 °C
- wM-Bus mode S, T and C
- Low power consumption & Deep building penetration
- 868 MHz
- OMS 3.x and 4.x compliant
- Firmware update via NFC
- Parameter setting via our Android NFC Configurator app
Samples for Testing
including IoT-Platform Access
Test our SWAN2 gateway!
If you are interested, we will send you a sample case with our SWAN2 gateway and our temperature and humidity sensors MUNIA & ROBIN for your testing.
In collaboration with our partners we are able to provide you an access to an IoT-platform. Depending on your application and needs the platform offers different tools such as a device management, the visualization of your data or forwarding your data.
Applications
SWAN2 - ENBRA, a.s.
Directive 2012/27/EU on energy efficiency leads to the collection of meter data in modernized buildings with our SWAN2 wireless M-Bus / NB-IoT gateway.
Go to article!