RWW Rheinisch-Westfälische Wasserwerksgesellschaft mbH - part of Westenergie was awarded as the 2023 TOP local supplier in the water segment for quality, transparency and sustainability by the "energieverbraucherportal". A quality seal that documents the conscious use of water as a resource and is assigned to local suppliers that are particularly consumer-friendly, service-oriented and innovative.
read more
We were able to keep downtime short for restarting our lines in the new plant because we had exactly the production material we needed in stock at the old location until the last shift and started up in the new plant with material provided "just-in-time"
read more
So far, we have mainly shown the production hall and our office floors with the fabulous view of the Haardt with its castles as well as our wonderful sun terrace from the new plant. Rarely do we show the premises that our production employees also enter every day.
read more
This week we have reached the point where there are more machines, people and material in our new plant than at the old location. We now have 3 SMT production lines, X-ray and AOI systems, laser markers, etc. and a wave soldering system on site at the new facility.
read more
Today we write about the things during visits and the machine technology that are often forgotten. In the new plant, we have installed state-of-the-art air-conditioning technology that supplies the production areas with conditioned air. The constant climatic conditions at 23 degrees Celsius and approx. 45% humidity allow a pleasant production and manufacturing of our products.
read more
Since last weekend, the majority of our company is now located in the Maria-Goeppert-Mayer-Straße in Landau. The administrative departments, human resources, IT department and management have now also moved into their workplaces at the new location.
read more
This week we are installing the second production line in our new plant. Over the weekend, we dismantled "Line2" in our production building on Ostring and transferred it to the new plant.
A third placer and a new soldering oven were added to the line. All service technicians and installers are now working at full speed to commission the line at the new location.
read more
We also want to ensure that we have a complete transparency in our new plant. In our old plant at the Ostring, the X-ray system was getting a little old. In the new plant, the state-of-the-art X-ray system from VISCOM is now helping us
read more
Our new plant is mostly photographed and shown from the highway (east side) or from above. Our striking location should ensure a high recognition value in the pictures, so that we can be found and reached quickly, especially during the construction phase. Until now, few people have seen the "back side", which idyllically borders on the Birnbach. This is now the view when colleagues come to work by bicycle in the future. The location is not only directly at the highway exit Landau-Mitte, but also has direct access to the connecting bike path between the new industrial area and Landau-Mörlheim. Here, too, directly on the "highway" and along the course of the stream. From the cycle path, cyclists directly access the parking lot at the logistics hall.
read more
We are always asked why our floor shines so brightly when visitors enter our production hall and warehouse. Visitors also ask us how it is that our cable routes, ventilation ducts, corners, stairways and installations are so clean after more than 6 months of construction site operation.
read more
When the machines in the new hall are producing so nicely, you can see the result directly in the magazines that are filling up. It runs and everything seems to be done by magic. This is not the case, because in the background the software from the old plant is still being loaded onto the machines and the test results from the optical monitoring systems are stored in the company's own server cabinet so that they can be tracked.
read more
Since Monday, the time has come. At 6:00 a.m., the first shift on the new line started. All machines and sub-processes are coordinated and networked. Colleagues have been trained on the new equipment, the shelves were filled and the air-conditioning system was calibrated.
ESD-compliant cleaning was carried out over the weekend by DLS Schlick from Offenbach/Queich. Thanks to Pacco and his team for the spontaneous effort!
read more
The new line cannot start producing if there is no material. As WEPTECH, we are finally saying goodbye to the lack of space of the existing building and moving into a new "logistics world". Goods receiving, pallet storage and shipping are now available on more than 1000 sqm.
read more
Now the time has finally come: The SMD area of the new production hall has been cleaned, the power supply and air-conditioning systems are in operation, and the machines are set up. The nitrogen tank is filled and the compressed air flows powerfully through the hoses. Just a quick alignment and connection, then it's time to get started.
read more
n order to express our thanks and solidarity to all trades and helpers for the successful cooperation and the great result, we held a small party on May 25.
read more
Three days full of informative talks, interesting presentations, inspiring exchanges and insights into the industry's innovations are behind us.
read more
Almost 20 months after the groundbreaking ceremony, the last scaffolding was dismantled last week and our new company headquarters shines in all its glory.
read more
At our new building in Maria-Goeppert-Mayer-Straße 4 in Landau, work is continuing fast and furious: we are currently installing the highly efficient energy and supply systems.
The photo …
read more
In perfect weather, the almost 14-metre-high nitrogen tank with a capacity of approx. 58,000 litres was installed at our new company headquarters at Maria-Goeppert-Mayer-Str. 4 in Landau, Germany.
read more
On 11.01.2023, the draft law of the Federal Ministry of Economics and Climate Protection (BMWK) to relaunch the digitalization of the energy transition was passed by the Federal Cabinet. The draft law is intended to advance the smart meter rollout as an important requirement for accelerating the energy transition.
read more
OMS stands for Open Metering System and is the only system definition in Europe that combines all consumption meters (electricity, gas, heat and water incl. submetering) in one application.
read more
We were happy to provide our facilities for a video shoot to our established customer Optimeas and are pleased with the successful result!
read more
After a very good start to the year, the chip crisis hit us especially hard, due to high material and personnel expenses. The safety stockpile that we had built was quickly used up due to the …
read more
Our new company headquarters in Maria-Goeppert-Mayer-Str. in Landau continues to take shape. On the occasion of the Christmas party, which took place in the still empty logistics/warehouse hall, there was a short inspection of the building with …
read more
On December 1, a new board was elected during the General Assembly of the mioty alliance. We are happy about the election of Wolfgang Esch to the board of the mioty alliance.
read more
With a laser marker from SmartRep, the production of intelligent utility meters becomes traceable
Many are currently afraid of the next gas and electricity bill. Smart Metering creates transparency: Consumption data for water, heat, electricity or natural gas can be read out and transmitted automatically. The company WEPTECH from Landau produces these smart radio modules and uses a laser marker from SmartRep for traceability purposes.
read more
Next week electronicaFair and the #WirelessCongress 2022 by WEKA FACHMEDIEN GmbH will start in Munich.
Wolfgang Esch, Head of Sales and Marketing, will be there as an ambassador for OMS-Group e. V. with his presentation on "OMS over LPWAN - The Open Metering System communication architecture for smart meters is also applied to LPWAN technologies".
read more
In the foreground the office building (still in scaffolding) and the three production halls behind it.
Work on our new building at Maria-Goeppert-Mayer-Str. 4 is progressing …
read more
„Finally, a face-to-face meeting with colleagues from the industry again." This was the universally resonant tenor of this year's Metering days in Fulda. The exhibition about smart metering, …
read more
In cooperation with Fraunhofer IIS, Munich Airport and Volue, WEPTECH has realized the "SKAMO" project.
read more
Our production lines have been equipped with new machines to meet the increase in design complexity with simultaneous miniaturisation of the components, as well as to ensure the increase in throughput and process reliability.
read more
Embedded world 2022, Nuremberg
"The IoT market has not yet developed as strongly as Industry & Research had predicted at the time, but still shows huge potential for development due to the wide range of possible applications in practice.” …
read more
Status 1.6.22: The roofing of the second production hall is being built.
Work on our new building at Maria-Goeppert-Mayer-Str. 4 is progressing steadily:The production halls have …
read more
With more than 720 exhibitors from 39 countries and more than 18,000 trade visitors, this year's "embedded world 2022" - from 21 to 23 June in Nuremberg - finally presented all the new embedded technology trends live again.A wide range of …
read more
On February 8th, the intermediate ceiling was installed on the first floor. The exterior walls of the building are almost complete and the roof is expected in 4 weeks.
In the front of the building you can see the future visitor´s car park and …
read more
As part of the South German Whoop League, the Flying Dragons are hosting a race in Ranschbach on March 5th, 2022. You can find all details in the flyer. Please register in advance by email. …
read more
Ulrich Eff (DIEHL Metering) and Jens Hørdum (Kamstrup) were newly elected to the nine-member committee in December 21. According to the press release, the goal of the OMS management team is to pave the way for interoperable metering in Europe and worldwide.
read more
It´s moving forward! The construction progress of the new WEPTECH company headquarters is currently fully on schedule. The base plates of the office and connecting buildings as well as the production hall and warehouse were cast. The ground …
read more
Despite the tense pandemic situation, Enlit Europe 2021 took place live with a strict hygiene concept in Milan and was all about Smart Energy Solutions. It was a great pleasure for us to …
read more
Integration of new machines in WEPTECH´s SMT lines successfully implemented
In order to meet the tight schedule for setting up the new machines in the two existing SMT lines, exact timing and precise coordination were required.
Two new …
read more
On November 11th, the kick-off event for the series of events "sustainable.innovative - SME´s meet sustainability" of the Investitions- und Strukturbank Rheinland-Pfalz (ISB) and the …
read more
Join us at ENLIT Europe 2021 in Milan and get an overview of the product portfolio for solutions in the fields of Smart Metering, networking of objects in the Internet of Things and Industry 4.0.
Let us advise you on the most important …
read more
from left to right: Pascal Magin, Ben Blädel, Philipp Doll, Julian Gonser
"One day trainee” was the motto for two students from the Konrad-Adenauer-Realschule Plus Landau on …
read more
The Technologie-Netzwerk Südpfalz e.V. was founded in 2017. With Dr. Günter Uhl it was chaired by one of the initiators. After four years he will hand over the chairmanship to Michael …
read more
On August 26th, 2021, from 11:00 a.m. to 11:30 a.m., WEPTECH and ECS GmbH will present options for all aspects of connectivity.
Increased customer experience, optimized services, …
read more
Groundbreaking ceremony for WEPTECH elektronik GmbHs new headquarters
After 24 years of good cooperation with GUMMI-MAYER, there is not enough space anymore in the building at Ostring 10 and the time has come for a new company location. …
read more
Highly competitive using the latest technologies
WEPTECH elektronik's assembly production has now been completed by a third SMT line with the latest generation of IFS machines, an …
read more
Remotely readable meters and heat cost allocators become mandatory with the amendment of the heating cost regulation and must use the OMS V4.0 telegram...
read more
Our wireless M-Bus / NB-IoT Gateway use case...
read more
The club Zentrum für Technikkultur (ZTL) has created a space for tinkerers. There they can come together to work, experiment and develop ideas. A “makerspace” in the truest sense of the …
read more
As a next generation technology, the protocol overcomes the limitations of other LPWAN solutions. The IoT sensor network developed by Fraunhofer IIS impresses with its robustness and reliable data transmission with low power consumption and …
read more
A good two years after we became the first company anywhere to acquire a licence to manufacture Smart Meter Gateways with a BSI Protection Profile, in February 2020 the Federal Office for …
read more
WEPTECH offers cost-effective and void-free convection soldering also for challenging CMOS sensors
Meanwhile, the use of CMOS sensors has prevailed in industrial image processing and many well-known manufacturers use this type of image …
read more
More efficiency thanks to IoT and the CTI Energy Metering box from Polygonvatro
Water damage can have many causes, e.g. Floods, heavy rain, burst pipes, etc. In the event of such damage, fast help is required. This is what Polygonvatro …
read more
For what reason was the SmartXcan developed?
Fever is considered one of the main symptoms of infectious diseases. Both influenza ("the flu") and COVID-19 typically cause fever. The risk of infection is much higher indoors, so early detection of …
read more
COUA-M is a low cost wireless RF module, based on a TI CC 1310 controller in the frequency range 868 MHz and an output power of up to 14 dBm. The module offers compact design, has a very low …
read more
Profitable use of the advantages of digitization and application of Industry 4.0 in reality
read more
WEPTECH elektronik GmbH supports the purchase of "PAUL".
read more
WEPTECH manufactures radio modules.
read more
In the fight against the Corona pandemic, additional medical equipment is urgently required, especially ventilators.
WEPTECH meets the high standards of medical technology and manufactures accessory components for the production of ventilators. …
read more
Good News! Our radio module PHOENIX-M is already capable for the new mioty® technology.
read more
mioty® products & system integration from a single source
mioty® is a standardized software-based connectivity solution for building massive, secure and …
read more
New building project is taking shape
Due to the constant development of the last years, the WEPTECH team has grown to 170 employees, so that the company building at Ostring 10 in Landau …
read more
After the Federal Office for Information Security (BSI) already authorized us a year ago with a certificate to produce Smart Meter Gateways, the obligatory rollout has not yet started in 2019 …
read more
"Things are going very well at the business location Landau," says Thomas Hirsch, Lord Mayor of Landau. During a visit of the delegation of the Ministry of Economic Affairs Rhineland-Palatinate and the IHK, the companies WEPTECH elektronik and …
read more
Join us at EUW 2019, booth M41 and get an overview of the product portfolio for solutions in the fields of Smart Metering, networking of objects in the Internet of Things and Industry 4.0 via …
read more
WEPTECH offers its employees the bikeleasing service. The leasing model makes it possible for employees to use high-quality bicycles both privately and commercially.
The environmentally …
read more
WEPTECH at the Wireless Congress in Munich, October 22-23, 2019, Novotel Messe München
2019 will be the year of the cellular Internet of Things (cIoT) and the Low Power Wide Area Networks (LPWAN).
Major topics in this context are new wireless …
read more
This year, WEPTECH was represented at the ZVEI metering days. On October 9th and 10th , the latest trends in smart meters were discussed in Fulda. Interesting solutions and exciting …
read more
On 13.06.2019 WEPTECH elektronik took part in the TELEKOM Partner Day in Bonn. Focus of the event was the topic of M2M communication via the Internet of Things. Intelligent IoT solutions can simplify processes, but also enable the control of …
read more
Cologne, May 2019 – Germany-based OEM, WEPTECH elektronik GmbH, unveils the newest addition to its temperature and humidity sensor portfolio – the mW-Bus Outdoor temperature and humidity sensor ROBIN – which facilitates comfortable indoor …
read more
On April 9th - 11th 2019, WEPTECH will attend the STMicroelectronics 1-day workshop to enhance the performance of your low-power RF design using ST’s cost-effective wireless connectivity solutions and dedicated development ecosystem.
As an …
read more
Landau, March 2019 – WEPTECH elektronik, electronics engineering and manufacturing service provider, announces that it has joined the STMicroelectronics Partner Program to support ST and …
read more
The embedded world 2019 was all about "embedded intelligence".
It was a pleasure for us to show visitors at our booth the connection of our temperature and humidity sensors via our wireless M-Bus / IoT gateway to the cloud. Sensor data such as …
read more
WEPTECH elektronik congratulates PPC on obtaining the BSI certificate for the first smart meter gateway, according to Common Criteria.
This completes the joint preparation phase, which included the WEPTECH Site Certification EAL4 +. We now look …
read more
In order to consolidate our strengths and grow successfully together, WEPTECH elektronik was awarded the title "Basic Partner 2018" by Telekom Deutschland GmbH.
WEPTECH elektronik leads the way in the development and production of innovative …
read more
Frankfurt/M., 04.12.2018 – With two new Executive Board members, the OMS-Group paves the way for interoperable metering. The General Meeting confirmed Professor Dr. Axel Sikora from the Offenburg University and Volker Eck from the Erfurt …
read more
WEPTECH has been included in the u-blox Preferred Design House Partner Program. The deciding factors for this were the successfully implemented projects CTI of Deutsche Telekom and NB IoT …
read more
The investments have paid off. WEPTECH regularly invests in the acquisition of new, high-performance machines. Last year, the manufacturing department was equipped with an additional 3rd …
read more
According to the motto "The ball is in the game", the first PPC customer event took place on June 27-28, 2018. As a participant, WEPTECH was able to attend interesting discussions about the smart meter rollout, as well as participate in …
read more
On June 19th, the T-Systems Partner Day took place in Deutsche Telekom´s representative office in the middle of Berlin. Topics included Smart City & Roambee. Among the 350 participants, WEPTECH presented an energy billing system via cellular …
read more
Wolfgang Esch, Sales Manager of WEPTECH attended the Wireless Congress in Munich and presented the first reliable measured values of meters using NB IoT technology. The event, organized by the technical journal Elektronik, Messe München and …
read more
Under the motto "Startklar für die digitale Zukunft", the Fachverband Elektronik-Design e.V. (FED) celebrated its 25th anniversary in Berlin from 21st to 22nd September 2017 in Berlin. More …
read more
From October 3 to 5, 2017, our wireless M-Bus gateway, which connects a wireless M-Bus device (eg utility meter) directly to a user application server on the basis of the new LTE Cat NB1 technology will be presented at U-blox stand 1G44 at …
read more
Highest quality standards for electronic parts
WEPTECH elektronik attaches great importance to modern development and production processes in order to provide its customers with consistently …
read more
WEPTECH elektronik is now an affiliate member of the Thread Group. This offers new possibilities in programming THREAD-specific product software.
Sparrow is WEPTECHs first THREAD & BLE radio module. It is supported by NXP‘s Kinetis SDK, …
read more
In 1994, WEPTECH elektronik GmbH was founded in the beautiful region „Pfalz“. Within 10 years, a successful EMS company was established.
The time had come to “fledge”. With the expansion of a development department with a focus on radio …
read more
In April, the Arrow Centralized Training (ACT EMEA 2017) took place in Paris and WEPTECH participated as a new franchise partner. There were five days of interesting trainings, networking, themed discussions, detailed demonstrations and case …
read more
WEPTECH CEO Oswald Maurer took part on forum discussion LPWAN at WEKA publishing house in Munich. Low Power Wide Area Networks offer exactly what users really need: transfer small amounts of data over long distances at low cost. In this way, …
read more
NB IoT/ Cat.NB1 is the answer of the telecommunication companies to LoRa and SigFox now. This technology is still being developed. Network providers and companies like Ericson, Huawei, Nokia, Telefonica, Deutsche Telekom and Vodafone stand …
read more
This year, the Telit Distribution Sales Conference, which focused on the technologies Cellular, 2G, 3G, 4G, LTE and NB IoT, took place in Portoroz. WEPTECH elektronik applies these technologies successfully already and accepted the invitation …
read more
On June 2 the regular OMS board meeting took place in Cologne at the WEPTECH sales office. The main topic was the certification of OMS devices. To support the acceptance and recognition of the OMS protocol, the OMS Group has established a …
read more
Read the new blog post on the thingsquare blog!
In a Thingsquare system, a gateway provides secure remote access to wireless devices such as sensors or lamps. The Weptech gateway is a ready-made solution that is available as a circuit board, …
read more
We are back from two exciting weeks in Essens and Nurembergs exhibition halls.
The E-world was characterized by the upcoming Smart Meter Rollout. We were happy to discuss with you current topics around the Open Metering System, the only open …
read more
Check out the latest blog post on Texas Instruments blog ConnecTIng Wirelessly!
read more
We would like to thank you for visiting us at the SPS IPC Drives 2015. The three fair days were marked by intensive technical discussions and future-oriented information exchange. We hope, with our products and services, we were able to give …
read more
WEPTECHs 6LoWPAN IoT Gateway provides an affordable open-source-based solution for connecting 6LoWPAN-based IoT networks to the Internet.
Oxford, UK, 8 October 2015:
RS Components (RS), the trading brand of Electrocomponents plc …
read more
WEPTECH elektronik develops 6LoWPAN IoT gateway
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) refers to a communication protocol for transmission of IPv6 packets over energy-saving wireless networks. It is specified by a working …
read more
The new 868 MHz radio module for wireless M-Bus and OMS applications In cooperation with STMicroelectronics as semiconductor supplier and EBV Elektronik as distributor, WEPTECH elektronik implements the currently smallest OMS radio module. The smallest possible design, with a form factor of 14,5 mm x 13,4 mm, allows a space-saving integration. Due to the new technology, where the pads are assembled on the bottom, all the interfaces of the processor are fed out. The radio module contains a complete OMS stack to OMS 3.X or 4.X specification. Thereby applications for various meters can be added easily. In-depth knowledge of the OMS specification is not necessary. For the realization of the Maia radio module, WEPTECH elektronik took over the overall development of the software- and hardware and also manufactures the module. Due to comprehensive know how in electronic design and manufacturing technology, the currently smallest possible OMS wireless module originates from Landau in the southern Pfalz, Germany. "The module provides an easy and fast integration of an OMS interface in a meter- or smart meter gateway and thus enables a fast time-to-market with the OMS interface", said Wolfgang Esch, Sales Director WEPTECH elektronik and member of the board of the OMS group. The 868MHz radio module is suitable for automatic SMT assembly and available in both trays and Tape & Reel. You can find more information about Maia here.
read more
NODA Intelligent Systems` know how in Smart Heat Solutions and WEPTECH elektronik`s wireless M-Bus OMS humidity- & temperature sensors provide future-oriented energy systems …
read more
WEPTECH elektronik and EBV laid the foundation of a long-term partnership.
In the course of the very good cooperation and the common development of the radio module Maia, WEPTECH was selected …
read more
The motto of the embedded world in 2015 was clearly noticeable in the fair halls in Nuremberg. Once again the world´s biggest fair for embedded system technologies showed their high value in …
read more
This year again E-world in Essen was the „place-to-be“ for the energy branch. About 24.000 visitors thoroughly acquainted themselves with subjects of the energy turn as well as efficient …
read more
The WEPTECH 868-MHz radio transceiver is a low-cost solution for wireless M-Bus applications. Customized applications and complete OMS applications can be integrated into existing software upon request. The 868-MHz radio transceiver is usable …
read more
The first participation of WEPTECH elektronik in the electronica 2014 was a full success. The 50th birthday of the global electronics platform attracted visitors from more than 80 countries …
read more
The new OMS Humidity and temperature sensor WEP-OMSF-868A is available now. For more information, please look here.
First samples of our combined sensor can be bought at the online shop of our …
read more
The humidity and temperature sensor WEP OMSF-868A also can be integrated into an existing wireless M-Bus network and provides reliable measurement data just like the temperature sensor WEP …
read more
WEPTECH is one of the 866 companies which have fulfilled the criteria and now have the chance to win the award. Initially 4555 companies have been nominated. Now 14 juries discuss who will be …
read more
WEPTECH was nominated by the city of “Landau in der Pfalz” to participate in the "Großer Preis des Mittelstandes" in 2014. Only one of every thousand companies in Germany makes it to the …
read more
