- Software & hardware development
- Carrier board design
- Assembly (Prototype to Series)
- Antenna technology
- Certification
PHOENIX-WU
Wireless M-Bus radio module
The phoenixis an immortal bird that cyclically regenerates or is otherwise born again.
For wireless communication with utility meters, WEPTECH elektronik has developed the wireless M-Bus radio module Phoenix-WU as a sub-assembly. It supports the wireless M-Bus operating modes S, T and C according to EN13757-4:2013. The module is optimized for use in a concentrator/ data collector.
The module is connected to the host system via a TTL UART interface. All radio telegrams received in a physically correct way are output unchanged via the UART interface.
We are ready to support you with the integration of the module into your application and the appropriate antenna design with antenna simulation, development and measurement.
Further detailed information can be found in the manual in the download area.
- Small footprint: 14,5 mm x 14,5 mm
- Output power: up to +16 dBm
- 32-bit MCU ARM® Cortex® M0+ Controller
- MCU frequency up to 32 MHz
- 8KB SRAM, 2KB EEPROM
- Ideally suitable for battery driven applications
- Ultra-low-power: Rx= Typ. 7,2 mA; Tx= Typ. 20 mA
- 64 KB flash-memory
- Packaging: Tray (90pcs) or Tape and Reel (500pcs)
Development Kit available
The easy way to start your connection
Our development kit contains:
- 1 development board with SMA antenna connector
- 1 development board with no antenna connector
- 1 programming / debugging adapter ST-Link/v2
- 1 868MHz antenna with SMA connector
- 1 868MHz antenna with U.Fl connector
- 2 USB cable
- 4 Pin Headers 2.54mm 2 Rows
Contact us for further questions regarding our radio modules.
Downloads
Manual
You can download the manual with all information about our radio module here. Ask for password.
What else can we do for you?
We support you integrate our radio module into your application:
- Software & hardware development
Because quality is already starting with design, we offer you individual software and production-optimized circuit board design, so that you have a solid start with your product. - Carrier board design
Do you already have a suitable carrier board as the basis for our radio module? - Assembly (Prototype to Series)
Are you still looking for a reliable EMS partner for the electronics manufacturing of your product? - Antenna technology
You are looking for a professional who optimizes the wireless range of your product? - Certification
We also advise and support you in the certification of your radio products.
